Description
HBM800-1201ALU Performance Automatic
The HBM800-1201ALU aluminum bandsaw is specifically engineered for cutting aluminum ingots and billets, as well as similar non-ferrous metals like magnesium. Delivering swift, reliable, and precise cuts with minimal kerf, it promotes future-proof and resource-saving production practices.
![Production band saw HBM800-1201ALU](https://www.sawing.co.id/wp-content/uploads/2024/03/Production-band-saw-HBM800-1201ALU.jpg)
HBM High-Performance Aluminium Sawing Unit
The HBM high-performance aluminum sawing unit delivers precision and efficiency in cutting aluminum and similar non-ferrous metals. With advanced features and robust construction, this unit ensures swift and accurate cuts, contributing to optimized production processes.
![HBM high-performance aluminium sawing unit 3](https://www.sawing.co.id/wp-content/uploads/2024/03/HBM-high-performance-aluminium-sawing-unit-3.jpg)
Servo Feed System For Short Non-Productive Times
The servo feed system minimizes downtime by swiftly transitioning between cutting tasks, enhancing overall productivity.
![Servo feed system for short non-productive times 3](https://www.sawing.co.id/wp-content/uploads/2024/03/Servo-feed-system-for-short-non-productive-times-3.jpg)
Roller Band Guides With Integrated Spray Lubrication
Ensure precise guidance of the saw band even at extremely high blade speeds. For a long service life, the bearings of the rollers are centrally lubricated by an automatic lubrication system.
![Roller band guides with integrated spray lubrication 3](https://www.sawing.co.id/wp-content/uploads/2024/03/Roller-band-guides-with-integrated-spray-lubrication-3.jpg)
Features of The Production Bandsaw HBM800-1201ALU
Optimum Chip Disposal.
Highest cutting performance requires high standards of chip disposal. The wide, funnel-shaped machine base allows chips to fly freely into the chip conveyor with integrated coolant tank below.
Precision Portal-Design Guide System.
The combination of stable, low-vibration saw frame and the linear guide system in portal design ensure the best band sawing results and maximum service life.
Prepared For Automation.
A powerful machine concept puts high demands on material handling. The production band saws of the HBM series are often configured as automated sawing systems.
Servo Downfeed System.
The saw feed is carried out by means of a ball screw and servo motor. This results in significantly shorter idle times and more precise saw feeds.
Automatic Guide Arm.
Optimum sawing result without any adjustments - even with frequently changing material sizes.
Cast Iron Band Guiding Parts.
Are made by BEHRINGER and provide vibration damping directly at the cutting edge, thus increasing tool life.
1° Inclination of The Saw Band.
Simplifies sawing in and out of wide flat materials and reduces burr formation.
Economical Use of Carbide Saw Blades.
Due to robust design, use of latest servo technology and well dimensioned chip disposal.
Technical Data Production Bandsaw HBM800-1201ALU
Cutting Range | |
Cutting range 90° round | 800 mm |
Cutting range 90° flat | 1,200 x 800 mm |
Smallest dimension to be sawn round | 50 mm |
Smallest dimension to be sawn flat | 50 x 50 mm |
Performance Characteristics | |
Feeding length single stroke | 600 mm |
Drive power | 22 kW |
Blade speed | 250 – 1,500 m/min |
Saw blade dimensions | 10,220 x 41 x 1.3 mm |
Rest piece length in automatic operation | 100 mm |
Total power | 33 kW |
Saw feed | servo-feed via ball screw |
Material feed | ball screw |
Material clamping | hydraulic |
Saw blade cleaning | electrically driven chip brush |
Dimensions and Weight | |
Length | 2,900 mm |
Width | 6,000 mm |
Height | 3,000 mm |
Weight | 7.300 kg |
Material support height | 800 mm |